Oggydoggy'n'doggydaddy
RCTalk Racer
- Messages
- 105
- Reaction score
- 138
- Location
- Pennsylvania
- RC Driving Style
- Racing
- Crawling
- Scale Builder
- Boating
I guess since I'm making. It a reality i will put it here lol i got some plastic cor sheet from micheals hobbys to make this a bit more "structural" since the whole bed is going to be load baring . I intend of mixing some epoxy resin and taping off the end filling the channels that get screws with a syringe then drilling it out will be using a servo for a working boom made from a 3x2 channel piece filled with resin then doing a super thin layer of tiger hair around the outside
Battery will go in the boom bed infront of the boom as I'm upping from the 450mah to a 750 mah 2 cell 20c
Some times ever little "bic" helps
Battery will go in the boom bed infront of the boom as I'm upping from the 450mah to a 750 mah 2 cell 20c
Some times ever little "bic" helps