RPM Rear Bumper for T/E-Maxx

RPM Rear Bumper for T/E-Maxx

If you’re tired of replacing the stock bumper on your T-Maxx or E-Maxx monster truck then take a look at the new Heavy Duty Rear Bumper from RPM. The new RPM heavy duty rear bumper for the T/E-Maxx comes in both black and blue colors and still allows you to use the stock Traxxas wheelie…

T-Maxx front and rear bulkheads from RPM

Better late than never… RPM has finally released front and rear bulkheads for the ever popular Traxxas T-Maxx and E-Maxx trucks. RPM has taken their trademark nylon and redesigned key areas of the Maxx bulk heads to reduce common stock bulkhead breakage. RPM also incorporates a series of lock nuts at the chassis and skid…

RPM A-arms for T-Maxx 2.5 and 3.3

The new Traxxas T-Maxx 2.5R and 3.3 – use Revo style axles which are much larger in diameter than older version axles and create interference issues on our current A-arms for the T-Maxx 2.5 (#80071 – #80078). RPM’s newest A-arms for these trucks compensate for the larger axle diameters with axle clearance zones built into…

Traxxas Adjustable Wheelie Bar

Traxxas now offers the ultimate Maxx accessory to all Maxx owners. The adjustable wheelie bar (patent pending) fits all Maxx vehicles including the E-Maxx, SportMaxx, S-Maxx, T-Maxx, T-Maxx 2.5R, and T-Maxx 3.3. This unique wheelie bar is a direct snap on accessory, and with a TRX engine or twin-Titan power on tap, it’s a must…

Proline 23mm Heavy Duty Hex

Today’s monster trucks just keep getting bigger and bigger. The overall weight of vehicles has nearly doubled and the amount of horsepower the engines produce has nearly doubled as well in just a short time span. Yes, the monster truck attributes are a changin’. Drive shafts have increased in size, aluminum or metal gears are…

T-Maxx Differential Shimming

Whats Needed: 6x9x.5 Teflon shims (# 3981) Tools to remove the diffs from the truck Lets Begin: Obviously, you need the diffs off the truck and fully disassembled. Clean all grease and/or oil off of all parts. You need to shim while the parts are “dry” so the grease isn’t adding false width here and…

RC-Solutions T-Maxx Bulkheads

What you will need for installation, this is based on the assumption these will be added to a stock T-Maxx, if other after market hop ups, or fasteners have been used this list will vary Quality #2 screwdriver 1.5mm hex driver Locktite After receiving the Bulkheads, I gave them the once over, they looked very…

JNR Racing Aluminum Skids and Bumpers

Introduction: What you will need for installation: – Quality #1 Phillips screwdriver. I prefer a flat nose #1 as it will sit deeper in the screw head, with less chance of stripping a screw. – Locktite Upon receiving the skids and bumpers I removed them from the package and gave them the once over. Overall…