Yes i understand how to use google but i want yalls answer

[Abigdawg]

How do i adjust the gear shifting timing on my tmaxx 3.3? i look where i was told to look but never saw anything. if you can, put pictures or something. my tmaxx also shifts WAY to early. how do i adjust?:\

 

[Kyleb]

http://traxxas.com/support/2-Speed-Shift-Point-Adjustment-0

Adjustment screw

 

[SMaxxin]

Pull the rubber plug on the tranny

Roll the spur gear until you see a hole on the hub inside the tranny

Hold the spur gear while rolling the truck until you see the adjustment screw

My eyes are bad so I need a flashlight to see in there

 

[Rolex]

Make note, according to the first pic, it is NOT the grub screw in the center but the one that's off set.

 

[Childresshunt]

http://traxxas.com/support/2-Speed-Shift-Point-Adjustment-0

This was what helped me with my t maxx shift point

but in short remove the big plug. turn your spur till you see the notch. hold the spur and roll the truck backwards (make sure this is turing the primary gear as shown above counterclockwise) roll till you see the first hold for grub then stop. Roll very slowly bc the next grub hole is the one you want. first grub is the set screw second is the shift adjust. turn counterclockwise for a earlier shift and clockwise for a later shift.

---------- Post added at 9:37 AM ---------- Previous post was at 9:37 AM ----------

NOTE: also this is all with a good tune

 

[Abigdawg]

ill check it out when i get home!!! thanks for the info