Sold / Found WTB tmaxx 3.3 lower hingepin

[flm_savage]

I need the hingepin for a lower arm. I know someone has one they will stick in an envelope for me.

 

[Racer 1966]

Are the 3.3s different than the .15s? I got several of the .15s and I'd be happy to send you one if it will work.

 

[NCNitro]

screw in type, or c clip type? I also have some from a 2.5 or .15 if they are the same.

 

[flm_savage]

It is the screw in type. I can get a measurement on the length but i am guessing they are all the same

well shoot. maybe not. this is what tower brings up.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMJE8&P=ML
Two 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

 

[NCNitro]

get a measurement of which one you need and I'll check my parts box.

 

[flm_savage]

looks to be right around 63mm (2.5")

 

[NCNitro]

I have screw in style, and also a c-clip style. Shoot me a pm with your mailing addy and I will get them out to you. Most likely wont be able to get them out until Saturday if that's ok.

 

[flm_savage]

awesome, thanks. i am in no hurry. This Saturday all the savage parts get here so the tmaxx will be shelved.

 

[NCNitro]

No problem at all, I'll get those out to you.