Sold / Found WTB: Running .12 or .15 cheap

[kwong2001]

Well, i'd like to satisfy my curiosity concerning the difference between true high performance engines and low powered base engines that come in RTR's

So here's what I want, I want a .12 or .15 sized engine. More underpowered, the better. Must be running. Kind of carb and exhaust doesn't really matter. Would prefer a non-pullstart but pullstart is fine.

I don't want an engine that's about to crap out though. Something that could see at least a gallon through it.

So what do you got?

 

[jon2]

Hey kwong I got a 12rss. rotary carb non pullstart

 

[DarthRacer]

I have an OS .15 CV with manifold and pipe!!

 

[kwong2001]

Originally posted by jon2
Hey kwong I got a 12rss. rotary carb non pullstart

Is that what comes in the HPI Nitro RS4 3 Type SS?

Originally posted by DarthRacer
I have an OS .15 CV with manifold and pipe!!

Short Shaft or SG crank? How much?

 

[DarthRacer]

Originally posted by kwong2001


Short Shaft or SG crank? How much?

Short Shaft. It has an aftermarket head and a PS.
With the pipe and header, I'm asking $75. I'll even give you the choice of a Dynamite pipe or AE pipe. LMK
It has had no more than a gallon of 20% through it BTW.

 

[jon2]

hEY KWONG i CUT IT FOR THE NTC3. DON'T YOU HAVE ONE?

 

[kwong2001]

Originally posted by DarthRacer


Short Shaft. It has an aftermarket head and a PS.
With the pipe and header, I'm asking $75. I'll even give you the choice of a Dynamite pipe or AE pipe. LMK
It has had no more than a gallon of 20% through it BTW.

Sorry, just looking for strictly an engine, no accessories. I've got all the aftermarket parts I need. Anyways, that's way more than i'm wanting to spend.

 

[jon2]

kWONG WHAT ABOUT 50 BUCKS? PM ME

 

[kwong2001]

Originally posted by jon2
hEY KWONG i CUT IT FOR THE NTC3. DON'T YOU HAVE ONE?

I'm assuming that's for the SS RS4. I'm more looking for a real low performance engine. No more than .6 hp if that. 15fe territory.

I want something that isn't very high performance, at all. I've already got a high end novarossi (1.52hp)

 

[DarthRacer]

How about an OS .12 with no accessories??

PS, short shaft $35

 

[jon2]

WELL THIS IS A LITTLE OVER 1hp. i COULD NEVER GET IT RIGHT. MAYBE YOU CAN!

 

[kwong2001]

Originally posted by DarthRacer
How about an OS .12 with no accessories??

PS, short shaft $35

Got pics? How many gallons?

Originally posted by jon2
WELL THIS IS A LITTLE OVER 1hp. i COULD NEVER GET IT RIGHT. MAYBE YOU CAN!

I could probably get the engine running right, but it's too performance orientated. I'm looking for entry level engines. The kind you wanna swap out really fast.

 

[jon2]

BARELY 3/4 OF A GALLON

dARTH i NEED A PULL START OS i WILL TAKE IT OFF YOUR HANDS
NEVERIND KWNG THIS IS YOUR THREAD
GO FOR IT SORRY

 

[DarthRacer]

I'll get pics tomorrow. It has a nice Duratrax head on it. It has had no more than 1 gallon of 15% on it.
jon2, if kwong does not want it you can have it same price.

 

[jon2]

DarthRacer let me know

 

[kwong2001]

Originally posted by DarthRacer
I'll get pics tomorrow. It has a nice Duratrax head on it. It has had no more than 1 gallon of 15% on it.
jon2, if kwong does not want it you can have it same price.

Very interested. Will be awaiting pictures.

 

[nitromaniac]

I have a tt.12 that came with my rtr ntc3, I ran 4 tanks through it and replaced it, excellent condition, been sitting on my desk in a OS box for 3 months(with aro in it) have the header but no pipe,
$50 takes it shipped.

 

[jon2]

Nitro maniac Let me have some pics!! PM ME!!

 

[maxxkid]

hey i got a traxxas .15 pro. or i have a OS .12 cvrx

 

[jon2]

Maxxkid pm me about the os 12 cvrx