Sold / Found WTB: 1/8 Buggy Roller (PURCHASED)

[Domination]

I'm looking for a buggy roller maybe a Storm or MBX Pro no RX TX and engine but would like servo to be included. If it needs a little bit of work or TLC thats ok but nothing that needs a poop load of new stuff to be slapped on there. I just want to experament I've never owned anything other than MT's and I'm starting to like the 1/8 buggys. The local practice track is kind of small for the savage it has alot of tight corners so i want something to bring there thats light low center of gravity and nimble. And just want another rc ro screw around with. I dont really want to spend more than $190 on a roller cause i still need to pic up a mill. But if its a nice one ill think about going a little higher.

 

[Razor]

buy mine. i can sell GOOD servos with it. look at my thread a few posts down. halfway down the page u can see everything ELSE i am selling.

 

[Domination]

nah i dont want a roller for $350 i already have a maxx and savage i just want a 1.8 buggy to get me started and to mess around with.

 

[Jester]

I've got an Ofna 9.5 roller with a few Pro upgrades I'll take $200 for.

 

[Domination]

Is that Shipped?

How well maintained has it been?

What does it need aside from a mill and radio gear (if anything)?

Does it come with a body or any other things not included in the pics.

And also one more question i notice as well on this buggy that all the 1/8 buggies have a very long fuel line is there a reason for that?

I'm likeing this offer give me like 2-3 days to get some info on it and make a solid decision.

 

[Jester]

Is that Shipped?

How well maintained has it been?

What does it need aside from a mill and radio gear (if anything)?

Does it come with a body or any other things not included in the pics.

And also one more question i notice as well on this buggy that all the 1/8 buggies have a very long fuel line is there a reason for that?

I'm likeing this offer give me like 2-3 days to get some info on it and make a solid decision.

I can go $215 shipped UPS with insurance and a tracking number provided you live in the ConUs. I really don't have much of a history on this buggy, I got it in a trade with the intention to get rid of it. It looks to be in very good shape, I have went thru the front diff and filled it with 7K wt silicone, and plan on going thru the center and rear diffs as well. I will use 5K for the center, and 1K in the rear. There really isn't anything else with it but what's in the pics. I got a body with it, but it's junk. The guy duct taped the front nose cone together. I think I can include an old pipe and header (provided I can find them), and I will include the complete clutch assembly. (Flywheel, shoes, clutch bell, clutch nut, and bearings) The steering feels a little tight, it may need either new bearings, or simply to have the servo saver taken apart and cleaned. Other then that, it's in great shape.

The Pro options on this buggy are the aluminum threaded shocks, the aluminum front and rear torque braces, the Pro bulkheads, and the carbon fiber steering plate. This buggy also has a 4 disk brake system and CVD's on all 4 corners.

As for the long fuel line... I run long fuel line on all my Nitros. The reason I do it is because they stay running longer when you flip them over. Or at least they seem to. LOL The fuel line has been taken off of this buggy since the pictures, but will be replaced. The fuel filter you see in the pictures will also be included. Shoot me a PM with your email address, and I'll send you a few more pictures, and don't hesitate to email me with any questions. I have positive feedback on several forums, as well as Ebay, and I'm Paypal verifed, so you should have no worries dealing with me. Thanks.

 

[Razor]

well dude, since my buggy ISNT FOR SALE FOR $350 anymore maybe if u had paid more attention in the thread u would know is near being for for $200 bucks.

 

[Domination]

Jester I'm gunna have to pass i dont likt that you dont have any history and havnt used it. Razor not sure on your offer yet.

 

[Jester]

*deleted content, obviously doesn't need this info*

Haha, that's fine. What kind of (history) would you need? The shocks are strong, the diffs are fresh, the chassis is straight. LOL If there were an engine I could understand needing to know how much fuel, but there isn't an engine. No biggy, good luck in your search.

 

[Razor]

dom, my buggy has good diffs, i have replaced parts that i thought needed be replaced, it has new bearings here and there, the STEERING has bearings(new) and it has a new frotn bumper, new wing, i JUST cleaned the buggy , any stuff u see on the buggy is not coming off with a tooth brush, scruber thing, and denatured alcohoal and water + soap. like the rear shock tower, it has the anodizing rubbed off from the body, the rear body mount has white paint rubbed on it after use. the front shock tower is gone, i bent it, it needs a new one. aside from that all thsi buggy needs is radio stuff and an engine.

but like i said, i HAVE a nearly new starter box, (blue w chrome top) a BRAND NEW 9886 inline pipe (novarossi) , and two servos, hitec 645mg, and an airtronics digital 94758 (?) servo (.06 @ 6v, 115oz tq)
ill sell the buggy + FM radio (lynx fm) + those servos, + the pipe + the starter box for 500 . thast a pretty good deal if u add it all up. i dunno thouh, if u want any of it holla back.

 

[Domination]

What kinda deal can we do for the buggy + Starter Box + Steering servo shipped with insurence and tracking?

 

[Jester]

What kinda deal can we do for the buggy + Starter Box + Steering servo shipped with insurence and tracking?

I didn't know you were looking to spend that kinda cash, I can hook you right up if you wanna spend the money. I've got an Ofna chrome top starter box with power pannel, Ofna 063 pipe, Hitec 645 throttle servo, 5645 steering servo, MIP temp gauge, Ofna micro failsafe, Ofna Hyper 8 port engine with a gallon on it, Motor savors air filter, and JR RS300 receiver that you can have right along with my Ofna MBX R2 with full Pivot Ball Suspension for $600 shipped. :smoke: The only thing you would need is an FM JR radio. Want some pics?

 

[Domination]

id rather have the MP 7.5.

But how much do you want for the 8 port?

 

[Jester]

id rather have the MP 7.5.

But how much do you want for the 8 port?

You can buy a new one for $119.

 

[Domination]

so is that your way of saying its not forsale?

 

[Maxx Trooper]

Got a roller OFNA Ultra MBX Pro, great shape.. pm me for pix .... $150. no engine.. steering servo.. tires and rims.. extra parts.

later

 

[Domination]

Thanks for the offer. But i puchased Razors 1/8