what should the picco .26 LSN should be??

[pissant]

I need help with what the factory settings should be for the picco .26 LSN? Any help would be great

 

[hudler]

Hi, there is a good article on the low and high speed settings and general information on the picco.26 on savage-central.com under the engine forum. Here is a link, I hope it works http://www.savage-central.com/ftopic2612.html Good info.

 

[Lessen]

According to the guide that comes with the engines the factory setting is 10.5-11.5 turns out from all the way in.

 

[golfinglenn]

That guide is WRONG. Use those settings and the needle darn near falls out. Correct setting is 7.5-8 turns out from all the way in.

Glenn

 

[mcvickj]

I remember reading somewhere that you can usually use one turn in from flush as a ball park setting for the LSN.

 

[Lessen]

Thanks for the update Golfinglenn, I'll keep that in mind for my break ins