Turn buckels

[chowmanstoys]

I put a 3.3 update fr/r rpm a-arms ,now turn buckels wont go on
not sure what size i have,or what size i need

 

[Phins Fan]

Did you get the true track RPM arms? If so you dont put the turnbuckles back on the rear

 

[Zdragon71]

Was it a 2.5 version and you upgraded to 3.3 rpm arms? If so you need 3.3 turnbuckles. Or rpm ones.

 

[chowmanstoys]

Did you get the true track RPM arms? If so you dont put the turnbuckles back on the rear

115mm or 125mm??

 

[Phins Fan]

??? I dont have the truetrack arms (still running my stock 2.5's) but do know if you have them you dont need to reinstall your turnbuckles. 115??-125?? I dont know what your asking??

 

[chowmanstoys]

turn buckels are sized
90mm to 125mm
they are not all the same size.

WHO KNOWS ABOUT THIS?????

 

[Nitro4910]

If you upgraded to the 3.3 shafts & axle carreirs then must use the 3.3 turnbuckles, you old 2.5 ones are too short & have the wrong ends on them.

3.3 turnbuckles
Stock front turnbuckles are #5141, red/black aluminum turnbuckles #5141R & #5141A
Stock rear turnbuckles are #5143, red/black aluminum turnbuckles #5143R & #5143A.

2.5/pro .15 model #4910 Maxxs
Front turnbuckles 108mm #5138/#5138X
Rear turnbuckles 116mm #5139/#5139X