• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

Tuning question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

mudbeast2

RCTalk Member
Messages
30
Reaction score
0
Points
0
RC Driving Style
Last time I ran my x I cleaned and oiled the filter with Uni brand oil. So today I go to try some new Torco fuel. Well I had to re adjust the high and low but she just wasn't hitting the high speed. Could it be the air filter oil I used or the fuel?
 
if you are using same % of nitro fuel and and same oil content it could be in the air filter, you've put too much oil that restrict the amount of air coming in to let your engine on the richer side. If not try to put all your needles to factory settings and start there to adjust or tune.
 
if you are using same % of nitro fuel and and same oil content it could be in the air filter, you've put too much oil that restrict the amount of air coming in to let your engine on the richer side. If not try to put all your needles to factory settings and start there to adjust or tune.

Hi avelciario,
I had recently washed and reoiled my inner filter.
I just finished reading your comment and used a paper towel to sop up the extra oil I had applied. It was actually pooling at the bottom of the the outer filter...

Thanks, big time.

Chas
 
Back
Top