tune question

[EMPERORLAY]

When I lean out the lsn a little on my xt2 buggy my idle goes a little high and won't go all the way back down. Which way do I need to turn my idle screw to lower the idle when leaning out the lsn, counter clockwise or clockwise

 

[3nigma]

i beleive counter clockwise

 

[jetmechG550]

It goes high because your running it lean.

 

[EMPERORLAY]

I didn't get too many responces but now I have my low speed needle where I want it but now it seems like my hsn is way too rich. My car runs really well and has super quick start up's but it's going pretty slow and the engine temps are only like 190. When I lean out the hsn the idle drops. Do I turn the idle screw clockwise or counrter clockwise to raies the idle. Also leaning out the neeedle would be turning it clockwise right:seeing_stars: . Thank's

~Adam

 

[tmaxx_lover]

I'm pretty sure its counter clockwise

 

[3nigma]

clockwise is lean counter clockwise is rich. i look at it this way the further down the needle goes the leaner it is the futher up it is the richer it is. for the idle clockwise is higher counter clockwise is lower

 

[Monkey Wrench]

Try using the manual that it came with, that'll help a ton.