Tranny Problems

[Newton Maxx]

Clutch engages but truck does not go. Any ideas. Give it full throttle and the large gear does not rotate. Clutch is pretty good condition and set in a trailing configuration. Thanks for your ideas.

 

[SkyMaxx]

Are the clutch bell and spur gear meshed (near touching as gears should)? If the clutch bell is moving under throttle and the spur is not, lack of proper gear to gear contact can be one cause.

 

[x_789]

Man if the clutch is ingaging and the spur is not turning the spur is stripped or your gear mesh is hosed. Turn off the truck and try spining the spur gear and see if it moves the clutchbell or not.