tmax ez start

[steve30mo]

3.3 was cranking great then quit.pulled glow plug and still would not turn over.all leads are tight and ground is good.batterry is fully charged..could be electric ez start motor.....is there a way to check motor
:\

 

[tmaxxman58]

my jato glow plug wire died on me that could be the problem

 

[Bkyd Basher]

perhaps it is stuck at tdc, i think I've heard that somewheres. Maybe try and turn the flywheel a bit to make sure the motor isnt the issue.I have also had a problem with the conectors in the plug pushing down in and not making good contact. Maybe just a couple things to check. Or even see if ur getting power to the motor.

 

[SchrodeMode]

Could be the EZ start wand, plug the battery directly to the motor or try another wand if you or a friend have a spare.