This is a few pics of my engine need a part

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

rushreedy71

RCTalk Rookie
Messages
22
Reaction score
11
Will any piece of metal i could use for this engine

20221221_170955.jpg
 
There is missing a metal pin that goes in the arm that fits on the crank shaft and the back plate fits onto
 
Thank you greywolf74 will have to look for 1
is the hpi 15fe engine crankshaft the same as the t15 crankshaft
 
Last edited:
Thank you greywolf74 will have to look for 1
is the hpi 15fe engine crankshaft the same as the t15 crankshaft
Not really sure. You'd have to get their respective parts lists and do a comparison. Sometimes they are interchangeable, depends on their specs.

I know not much help, but I'm not intimately familiar with those engines to say for certain.
 
No worries, sure this is your problem. Just to be sure make sure the conrod moves up & down when you turn the crank, it could be you have shred off the end of the crank but from the photos I don't think so. Also see if you can see the old pin in the casing, should be removed if it is in there. Debris in side your mill ani't good
 
Back
Top