TeE Maxx Build

[DB_86]

I figured I'd start a dedicated thread for this conversion build. I will let the pictures tell the story. I am also open to any suggestions.

Here is what I started out with. A tmaxx 3.3

Then I tore it down to this and sold the spare parts

Here is what I ended up with. I still have to save up some money for the motor and ESC.

I used an E Revo tranny and the factory E Maxx motor mount with OFNA battery boxes.

For the transmission mounts and the ESC stand I used an old skid plate

I used an HPI Savage dog bone up front with E Revo cups. I also plan to add a dual servo set up


I know this has been done before but I've never saw it done exactly like this. I will keep you guys up to date if you are interested

 

[hotrodrob]

Cool man we like builds around here, what motor and esc setup are you gunna go with?...what bottom braces are those?

 

[DB_86]

Thanks, I am looking at the hobbywing 2200kv motor and 150amp ESC or maybe a mamba system if I can find a good enough deal on one. I plan to run 4s only. The braces are integy they were on the truck when I got it but they seem to be pretty nice.