t-maxx 3.3 brake question

[randy0050]

hi ! this is my first post.
i am building an t-maxx extended chassis mt. i can't remember what part fits on the rear output shaft that the brake disc rides on.. i dont have a hole in it like the 2.5 tranny . i have the 3.3 disc, pads,screws, and brake acuating rod.. does any body know the part # or a picture of it ? i dont see what would stop the disc from spinnig after the pads are applyed..
thanks,
Randy


jato 3.3, traxxast-maxx 2.5 frame w/3.3 and this project

 

[frickenjoey]

Well actually the brake is on the front of the transmission and the front drive shaft has a couple pegs in it that goes into the slot on the brake disk.

 

[randy0050]

perfect !!!!! i was upgrading shafts b/c of the bb !! that will work for now !!!! thanks so much Joey !

 

[randy0050]

also the small peice that pushs the brake pad,,, i think it was brass... i dont see it on the diagram

 

[randy0050]

found it !!! thanks again for the help