Surch’s garage

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Surchaufeur

RCTalk Member
Messages
25
Reaction score
1
An arrma raton 6s exb With a fee upgrades with 3D RC parts and hot racing gearbox And other little ones like the m2c outdrives In the rear and Driveshaft pins. He is currently down because esc decided to have the 4 green lights of death and i can't solder my cap pack into my spare one because my soldering station sucks. It never break that the electrics decide to heat out before anything gives up. I have a crackedtop arm but if its not broken why replace i(only for plastic A arms i use that way of thinking as u can see lol)
766DB85D-6230-48E8-827D-2BE3310DB58D.jpeg
EF0BE080-332E-48DC-929F-498E12477C49.jpeg
601A5030-1937-425D-8FC2-8D2D49103C5E.jpeg

My other truck is a notorious v5 but wih exb Ect diff braces minus chassis And shock towers. The rest is the same when it comes to upgrades.
E16C2340-9AC3-4C6A-8E55-BBE6F49E3F47.jpeg
B98E0D4A-B8D6-4C2C-89D7-D59053532D8B.jpeg

i have been giving it hell for the pass few packs and still nothing has broken on it. Just the body needs some paching and extra reinforcement With shoe goo. My kraton body is almost 2 years old seems more durable than the notorious body ironicly. But i use a better dry wall tape on the noto who claims is stronger than anything else. The noto body has nothin to protect its roof if it lands on its head and thats quite stupid if u ask me it cracks around the windshields.
image.jpg
 
Couple nice builds you've got going! I've got both the v4 Kraton and the v4 Noto and absolutely love them! Both are my m2c beefed out bad boys for big sends🤘🏼 both mine have m2c chassis, mix of CRCU chassis braces, m2c braces, voltage towers, m2c towers, hinge pin kits, Integy and HR aluminum gearboxes, RPM arms, 3D-RC wing mounts and exb bumper spring etc etc🤑 max6 in the Noto, 4585 1580kv in the Kraton just absolute beasts and take the 30+ft sends all day💪🏼😎
20210916_003758.jpg
20210916_003823.jpg
20210916_003923.jpg

definitely agree about the Noto body and every single one breaks at the same seam at the front fender well and to the windshield. I've found it helps to really reinforce that seam and section and also I put some foam padding around the rear body holes to help where the rear tower hits and also along the front where the front tower hits.
Rear
20210916_005115.jpg
Front
20210916_005137.jpg
 
I only upgraded what i found necessary. I also have a foam block on the front of my kraton for the shocks standoffs
 
Back
Top