stripped tranny mounts...

[racin_38]

is there anyway to build up the holes to be able to reuse the tranny case ??
i heard filling the holes with med CA glue will be an easy fix ,,
has anyone done this and does it work ?

thanx rick

 

[Tarant]

I have use CA but it didnt work, but most likely it was me.I have tried Shoe Goo and it worked pretty good.

 

[ZANDOR]

Check your local industral supply store for loctite thread repair.

this stuff does the trick

thread repair

 

[retarded pilot]

its probibly cheaper to buy a new case ...but i found this...

http://www.2coolrc.com/Model_T-Maxx/screws.html

 

[racin_38]

good morning ppl.
thank you for the responces ,i found a tranny case on ebay cheap,bought that ..lol
thanx thoe
rick

 

[LazyDave]

Yea repars tond cut it. They are weak. I would have bought a whole new tranny case, but a better one. They have alum. ones right?

 

[FSTFBDY]

Yes they have Alum ones. I have one in my Maxx.

Glad you found a spair to buy. I was about to offer up a Stock plastoc one I have in a box.

 

[lykan]

me, I just used screws that were tapered they were 4 MM, but they weren't like machined thread they were rough like a sheetmetal looking screw workin fine for a while now.

I do that will all my maxx screws that strip out in plastic

 

[Plaidfish]

you can also drill through the plastic and use bolts to hols it.....the repair kit works pretty good as well...I've used it once before and that tranny is still going strong...