Stripped Screw

[darianrock]

When I went to Taking out my 42 tooth gear out of my hsp warhead, I noticed that a allen key screw was very stripped and I could not get it out to replace the gear.

Here is a picture of the stripped screw (please Help)

 

[FatNinjaBro]

same happend to me i had to drill it out and get another screw
i think these fit http://www.ebay.com/itm/02098-M-3-4...pt=Radio_Control_Vehicles&hash=item4ab865d34c

 

[REVO-5309]

drill it out and it should come off, if its not a clean drill u may have to tap it off.

 

[FatNinjaBro]

drill it out and it should come off, if its not a clean drill u may have to tap it off.

my point exactly

 

[HPI-Killer]

No no no dont do that^^ thats a last resort.


Get yourself a dremel with a cutoff disc bit, and cut into the cup until you cut about a 1/32' of an inch line into the grub screw. Take a jewelers standard driver and back it out.