Steering servo change SS

[toscano1]

Is there an easier way to remove steering servoi ?? Looks like alot of stuff needs to be removed...thanks

 

[pissant]

what do you mean a easier way?? there is only one way, !take the screws out! If you think taking the steering servo is a pain man try taking the whole car apart!

 

[toscano1]

Hey no need for exclamation points--just saying looks like I need to remove a couple of things just to get servo out, unlike my stadium were it is readily accesible.. My first expierence w/ MT.

 

[AC48]

That's the thing about the savage, the radio box is almost impossible to get to. There really is no easy way to get the steering servo out lol.

 

[Team 17]

Some Trucks or cars are built differently. Depending on the Manufacturer, some parts are easier to get to on some trucks than the other. For example, the T-maxx is a pain to get to some parts while the Mammoth is alot more spread out and easy to get to.

 

[SkyMaxx]

There is no easy way to remove the steering servo.

 

[newnitrofan]

Hmmm I usually just remove all of the screws holding down the front skid plate and pull it forward than take off all of the necessary screws for the servo and change it. I do wind up leaving the skid plate attached to the bumper though.

 

[toscano1]

Looks can be decieving. Thought it was harder than it actualy was. Swapped servo in about 15 min.....

 

[lykan]

I thought puttig hte front end of the avage together was about equal with the T-maxx..difference is the T-maxx looks a tad weaker to me.. I realli like the way the servos are laid out in the savage.

 

[BlueRidge1]

Don't feel bad toscano1, I had the same thoughts when I first approached replacing my steering servo.

 

[toscano1]

TX Blueridge1, Now I have to finish breaking in the .26 Picco