Starting the engine on my 25

[Life in the fast lane]

This is a stupid question but, how do you start the engine with a roto start system.

 

[Got Nitro?]

alright,make sure your battery is charged. Then put the wand in the roto start, Then look down the center of your savage(from behind) you will see a hole in the backplate to the left top corner. Put the starter in, Plug your glow igniter on the plug. Press the starting button and it will spin the engine over.

 

[retarded pilot]

good advice

ill also add do a search on this forum for "how to prime engine"
you will need to prime the engine....but be carefull not to overprime, or you will destroy the one way bearing

 

[digger]

You will forget to charge the battery in the rotostart. Serious.

If ya use an electric drill, use one with a clutch on it.

 

[speedticket75]

change the rotostart to a pull start..........its a lot easier & ya aint gotsta lug that rotostarter around ever time ya wana start the engine + dont gotsta wory bout chargins a starter battery or have the agervation of a dead rotostart battery cause ya forgot to cherge it before a race or whatever. the 1way bearing will last longer too......