shift set screw

[bergoff]

First off I want to say thank-you for all of the good info that help getting my revo 2.5r running good. My only problem is that I can't get it to shift. Does anyone know about how far the screw should be turned out from the bottom. The guy that had it before had it almost bottomed out. Thanks

 

[SteelCityNitro]

First off I want to say thank-you for all of the good info that help getting my revo 2.5r running good. My only problem is that I can't get it to shift. Does anyone know about how far the screw should be turned out from the bottom. The guy that had it before had it almost bottomed out. Thanks

I'm not exactly sure how many turns. I've never actually had to mess with mine... but you could adjust it just a little at a time until you find the sweet spot

 

[2revo1maxx]

The best thing to do is pull the tranny (it's only 7 screws) and inspect the 2nd gear primary. If it looks ok loosen the screw about 2 turns and then 'tune' it from there. Gear ratios will affect the shifting too, what ratio are you running?