Servo no good?

[Killarracer]

I have a question I have a t maxx 2.5 and the servo for the gas and brake only works the gas. Even if I take the linkage off the servo it still does nothing when brake is applied. Is the servo junk? It's a ic servo Ms-626? Thanks guys

 

[Killarracer]

Ok just changed the servo and now I have another problem. Put a traxxas 2018 in now have brakes but I have a traxxas 2055 steering servo and both servos seem to interfer with each other. Could it be the batteries in the t maxx are dieing or what else could this be. Thanks

 

[SchrodeMode]

Could it be the batteries in the t maxx are dieing or what else could this be. Thanks

That's the first place I'd start.

 

[_danimal_]

1. Yep, start with the batteries

2. Make sure the servos are plugged into the correct receiver channels

3. Disconnect the servo horns and trim the servos to center (using the trim knobs on the transmitter)

Hope this helps, and you're running soon!

 

[Killarracer]

Just want to say thanks guys it was the batteries and the maxx is back and running stronger then ever!!!