Screw Sets

[NITRO 21]

I need to know what screw set I need to get for my Inferno I was told it is a 7.5 that was converted to a kanai 1 then to a Kanai 2 and the hexheads screw set I wanted to get for it comes as either a 7.5 set or kanai 2 set what are the main difference's between the two so I can tell for sure what I have? The screw difference is like 25 more for the k2 set, also what size screws do I need for the engine mount?

 

[1meathead]

blue shock towers ar kanai and gold are 7.5 but if it has been converted this wont help. I would go with the kanai2 ones should be ok

 

[ZANDOR]

here you go I bought a kit from these guys there are the best HEX HEADS



http://www.hexcrews.com/

then click on the on line store

 

[NITRO 21]

Thanks, hexscrews.com was where I was planning on getting the conversion kit from. In the mean time does anyone know what screws to mount an engine to the stock mount? would 3x16 cap screws from my Storm mount fit?

 

[1meathead]

look in this it will help http://www.kyosho.com/manuals/index.html

 

[NITRO 21]

Thanks 1meathead, I have tried there but my acrobat reader doesn't work for me on it.

 

[StaticSag]

Try saving the file then open it....I have to do that alot


Saggy

 

[NitroMarine]

Well, whatever you do, STAY AWAY FROM RCSCREWZ. They strip out very easy when using good quality wrenches. I only use them for backup screws if needed.