• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

Savage X Help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
A

Alex-818

RCTalk Member
Messages
39
Reaction score
0
Points
0
RC Driving Style
  1. Bashing
Hey guys, today i bought the one way bearing to crank my truck, but it didnt come with instructions can you guys help me how to install, like do i need to put oil or anything like that?
 
If you have the f4.6 you have to pull the roto start and the backing plate on the motor and inside the crank case the oneway will be right there. Pull the old oneway out and silde the pin of the new oneway in the hole where the crank and the pistion rod meet and put it back together. with the .25 pull the roto start and the one way is right behind it. You can also go to www.hpiracing. and down load the the book on your truck and that can help you too.
 
hpibasher said:
If you have the f4.6 you have to pull the roto start and the backing plate on the motor and inside the crank case the oneway will be right there. Pull the old oneway out and silde the pin of the new oneway in the hole where the crank and the pistion rod meet and put it back together. with the .25 pull the roto start and the one way is right behind it. You can also go to www.hpiracing. and down load the the book on your truck and that can help you too.
Click to expand...

Thanks man do i need to put any oil?WD-40?
 
Axle bearing grease, it repels the nitro fuel somewhat and protects the bearing's plastic cage that's inside. It does not cause slippage either.
 

RC Builds

Back
Top