Savage tuning problem

[Jezza151]

I spent most of my Sunday tuning my savage, I got it accelerating fairly sharp ish but still no wheelie action!! And when I removed my air filter to clean later I noticed that the throttle action is restricted
By the petrol tank!! Is this my problem why I can't seem to get it to wheelie and how do I overcome it. I'm not certain which model my savage is .
:\

---------- Post added at 11:38 AM ---------- Previous post was at 11:37 AM ----------

P.s
When I open the throttle fully the slide is still visible by around 2.5mm so it can't be getting all the air it needs

 

[avelciario]

If you are using the stock linkage, adjust the plastic that connects to the carb, there's a thread that you can make it more shorter. Then adjust the other linkage attach to the servo.

 

[Jezza151]

Hi Thanks for the quick reply It is the stock linkages, I've adjusted the thread on the short linkage to carb, but cannot see any in the servo itself its still restricted atm

 

[avelciario]

I mean adjust the arm that is connected to the servo, see to it it is in a neutral.