ch3no2junkie
RCTalk Basher
What is a safe voltage to discharge NiMH Rx and starter pack batteries to? I'm in a tinkering mood, and want to make a discharger that will stop at a set voltage. I just need to know what that set point is.
-
Welcome to RCTalk! 🚀
Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!
- ✓ Friendly & passionate RC enthusiasts
- ✓ RC tips & troubleshooting
- ✓ Buy, sell & trade RC gear
- ✓ Share builds & upgrades
Safe Discharge Levels??
- Thread starter ch3no2junkie
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
RC Addict
RCTalk VIP
NiMH don't need to be discharged like the old NiCd's did. But, if you want to discharge them, you can drain 'em all the way down. Won't hurt them a bit...
I would add this: IMO it IS best to store your batteries with a partial charge. What that charge is would be subjective.
I would add this: IMO it IS best to store your batteries with a partial charge. What that charge is would be subjective.
Cupooterluvr
Hardcore RCTalk User
40% charge is recommended for storage.
As far as discharging, don't discharge it to where absolutely nothing happens when you input with the controls. The battery needs some charge for the charger to recognize it.
As far as discharging, don't discharge it to where absolutely nothing happens when you input with the controls. The battery needs some charge for the charger to recognize it.
Metalhead Matt
RCTalk VIP
.9 volts per cell. 6 cell pack= 5.4 volts. 5 cell pack= 4.5 volts.
Mickstix
RCTalk Champion
.9v on a 1.2v cell is what I thought as well..
