DirtySavage25
RCTalk Qualifier
- Messages
- 157
- Reaction score
- 0
- Points
- 0
- RC Driving Style
my roto start is not catching, is there something wrong with the one way bearing? please help me.....
thanks,
gus
thanks,
gus
-
Welcome to RCTalk! 🚀
Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!
- ✓ Friendly & passionate RC enthusiasts
- ✓ RC tips & troubleshooting
- ✓ Buy, sell & trade RC gear
- ✓ Share builds & upgrades
roto start problems....
- Thread starter DirtySavage25
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
digger
Hardcore RCTalk User
Roto start turning? need this http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXDLN7&P=ML
Have to take the engine out and take the roto start plate off the back of it. Parts breakdown in the back of your manual.
Have to take the engine out and take the roto start plate off the back of it. Parts breakdown in the back of your manual.
your one way may be shot. remove the rotostart and spin the one way. If it grabs then I would check the rotostart backplate. If it spins both ways...get a new one way and switch to a pullstart and hone in on your tuning skills.
digger
Hardcore RCTalk User
If you're using a drill. Be sure it has a clutch on it. Don't be like me, just plug up the 3/8 Makita and let her rip. Thought I was being careful. 
Guess that is why the one-way is so easy to tear up. If it didn't mess up, ya might bend a rod.
Order 2 if ya have to order it. Hell, order 4. I need 2 now. :jk:
Guess that is why the one-way is so easy to tear up. If it didn't mess up, ya might bend a rod. Order 2 if ya have to order it. Hell, order 4. I need 2 now. :jk:
DirtySavage25
RCTalk Qualifier
- Messages
- 157
- Reaction score
- 0
- Points
- 0
- RC Driving Style
- Thread starter
- #5
omg foget bout the roto(its fine) check out the other thread my ENGINE TOOK A CHUNK