ok so I went out and got my revo running again after not driving it for about a year. anyway the trans seems to not want to shift into second sometimes. I took it apart when I put it away last year and didn't see anything really wrong. do you guys have any ideas on what could be wrong? or know what the factory setting is for the engagement pawl screw in the tranny. oh yeah I have the foc kit and a picco .27 in it. any ideas would be great cause i'm out. thanks in advance.
-
Welcome to RCTalk! 🚀
Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!
- ✓ Friendly & passionate RC enthusiasts
- ✓ RC tips & troubleshooting
- ✓ Buy, sell & trade RC gear
- ✓ Share builds & upgrades
revo trans trouble
- Thread starter iceman320
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Thread starter
- #3
could it be possible that I have the engagement screw set to loose. and the trans is stuck in second all that time? I adjusted it last night a little so I will see what happend when I drive it this weekend.
Captain Chaos
RCTalk Addict
If its counter clockwise to shift earlier then gentley take screw in clockwise until it stops and back out 6 turns.It should shift early and adjust from there.Let me know how it works out.
Engine must be up to temp and tuned for final ajustment.
Engine must be up to temp and tuned for final ajustment.