Mattyfats420
Hardcore RCTalk User
-----SOLD-----
I bought my Revo 2.5R bone stock from one of the boys in blue on the site =]. since it was my first truck i bashed around a little. got to know the truck, than started to take it down to the track and mess around some. i instantly enjoyed myself. so i did some odds and ends with the money i had.
STATS:
-RPM A Arms
-RRP FOC
-Resonator pipe
-1/8 scale 3 shoe clutch and Flywheel
-Traxxas CVDs
-Proline aluminum servo arm
-ACER Ceramic ball bearing Kit
-blue aluminum bumpers,fuel tank guard, servo guard, ECT
-traxxas aluminum 14mm hexes
-40 series bow ties (95% tread left) on proline dish wheels
-lunsford Titanium hinge pins
-Lunsford Titanium Screw kit for Revo
-Proline crowd pleazer 2.0 body with custom paint job
-MS air filter (Modded with stock filter neck)
-traxxas red alum front and rear turnbuckles and pushrods
-RPM over sized axle carriers with the over sized bearings. and MIP hard coated pivot balls
-3.3 Tranny with center diff, rear brake, close ratio gears ( all brand new, never ran),
-MIP shiny center CVDs
-Hardcore Titanium total under carriage skid
-Tenko wing mount with Proline High Downforce wing
-OS18TM, brand new, never ran
-RPM True Track rear conversion.
-Carbon Fiber rear break rotors from a Jato
-RRP front and rear diff gears with 50K oil in front and 20K in back and RRP FOC and RRP close ratio tranny gears. all brand new, never ran ( same set up as the platinum revo)
-and much more
I'm sure that I'm missing some stuff i have on there thats not listed, but ill get a complete list of parts that are upgraded and some more pics of the Truck as is. ( some of the pics on here are a few months old)
New pics taken today 11/19
PICS of the build
OS.18TM
OS .18TM and GTR shocks
RPM Tru Track Conv.
front end with OS axle carriers
Ti skid
Proline body and wing
vented brake rotor MIP CVDs
this is a totally race ready Revo and will surely make you a winner
$500 OBO or $400 without the OS .18TM plus shipping or $350 for a rolling chassis plus shipping. i just moved from Florida, which had a great track and racing scene, but now I'm in Long Island and they dont have anywhere to race Nitros around here, so i just dont need it anymore. Would be willing to part out the OS .18TM for $175 shipped
also willing to trade or partial trade for any electric 1/10 MT or any 1/18 or 1/10 electric on road TCs, or a nice charger that does, lipo, and NiMH
Thanks
-MattyFats420-
I bought my Revo 2.5R bone stock from one of the boys in blue on the site =]. since it was my first truck i bashed around a little. got to know the truck, than started to take it down to the track and mess around some. i instantly enjoyed myself. so i did some odds and ends with the money i had.
STATS:
-RPM A Arms
-RRP FOC
-Resonator pipe
-1/8 scale 3 shoe clutch and Flywheel
-Traxxas CVDs
-Proline aluminum servo arm
-ACER Ceramic ball bearing Kit
-blue aluminum bumpers,fuel tank guard, servo guard, ECT
-traxxas aluminum 14mm hexes
-40 series bow ties (95% tread left) on proline dish wheels
-lunsford Titanium hinge pins
-Lunsford Titanium Screw kit for Revo
-Proline crowd pleazer 2.0 body with custom paint job
-MS air filter (Modded with stock filter neck)
-traxxas red alum front and rear turnbuckles and pushrods
-RPM over sized axle carriers with the over sized bearings. and MIP hard coated pivot balls
-3.3 Tranny with center diff, rear brake, close ratio gears ( all brand new, never ran),
-MIP shiny center CVDs
-Hardcore Titanium total under carriage skid
-Tenko wing mount with Proline High Downforce wing
-OS18TM, brand new, never ran
-RPM True Track rear conversion.
-Carbon Fiber rear break rotors from a Jato
-RRP front and rear diff gears with 50K oil in front and 20K in back and RRP FOC and RRP close ratio tranny gears. all brand new, never ran ( same set up as the platinum revo)
-and much more
I'm sure that I'm missing some stuff i have on there thats not listed, but ill get a complete list of parts that are upgraded and some more pics of the Truck as is. ( some of the pics on here are a few months old)
New pics taken today 11/19
PICS of the build
OS.18TM
OS .18TM and GTR shocks
RPM Tru Track Conv.
front end with OS axle carriers
Ti skid
Proline body and wing
vented brake rotor MIP CVDs
this is a totally race ready Revo and will surely make you a winner
$500 OBO or $400 without the OS .18TM plus shipping or $350 for a rolling chassis plus shipping. i just moved from Florida, which had a great track and racing scene, but now I'm in Long Island and they dont have anywhere to race Nitros around here, so i just dont need it anymore. Would be willing to part out the OS .18TM for $175 shipped
also willing to trade or partial trade for any electric 1/10 MT or any 1/18 or 1/10 electric on road TCs, or a nice charger that does, lipo, and NiMH
Thanks
-MattyFats420-
Last edited:
