Revo BB

[Uneek]

I built this revo on my first try... it's actually quite simple you just can't be afraid of trial and error. All I used was my own screws, bolts, washer, and spacers to mesh the spur n clutch and traxxas bb kit.
If you need any pic, advice or help just send a request and I'll be more than happy to help. Just threw one in of the losi5t

 

[cbaker65]

Nice!...

If your leary about engine mount shifting an messing up the gear mesh ,you can drill a small hole
for a set screw to lock the mount in place to keep it from shifting.

I did that to my Mgt. because I bash it hard with 20 air!....

 

[Uneek]

Nice!...

If your leary about engine mount shifting an messing up the gear mesh ,you can drill a small hole
for a set screw to lock the mount in place to keep it from shifting.

I did that to my Mgt. because I bash it hard with 20 air!....

Thank!... i can't imagine y I didn't think about that considering I did it to my losi

 

[Nitrotrout]

Nice work. I've never seen this done before. How is she performance wise so far?

 

[Uneek]

Nice work. I've never seen this done before. How is she performance wise so far?

The performance is insane... and to be honest! I barely broke the motor inn. I've only ran about 3/4 of a tank so far. When I first started it up, just idling will move the truck at an alarming rate. I had to sub trim the break Servos to apply more pressure so I can at least stop the thing. Now, I press the throttle less than 1/8 but more than 1/16 and that thing just begin to lift. But what makes it awesome is that it's very easy to control. Well I'm sure their avc system has a major part in that but it really serves the truck good. I'm still going threw minor things to perfect it but it's mostly things I prefer.