Revo 3.3 EZ Start Problem

[alexchen86]

I have just got my Revo 3.3 back to factory settings then I had to change fuels with a different brand. So I retuned a little bit and got it running fine. Then on a high speed pass, the motor cuts off on me.

The temperature was not overheated in fact it was around 170 degrees. Then upon using the ez-start again the glow plug light did not turn on so I replaced it. With the new glow plug in the motor won't crank.

I thought maybe it was flooded but when I took out the glow plug and ran the EZ start the motor wouldn't crank either. I swapped 3 different batteries into the EZ start thinking one of the batteries were dead.

It did no good. I am thinking maybe the EZ start itself is fried?

 

[weezracen]

What did it sound like when you tried to start it?

 

[revo_rob_1984]

i had the same thing happen to me, when it shut off. . .did it sound like it just "flamed out". . .cuz thats the same thing mine did and it ended up being my OWB being seized to my starter shaft

 

[ecajoe]

starter motor could be dead i killed mine at a construction site now i got a pullstart for now atleast less electronics to worry about