Replacing Bulkheads - how to?

[THUNDER]

Question for you all,
I just broke the stock front bulkheads and was wondering if there is a web page or instructions on how to replace them?
I'm sure I could figure it out, but I thought if I had a set of instructions to go by, my chances of messing it up would be less.
Any one know where to get some, or any advice.
Oh, using that 20% nitro really cooled down the engine, thanks for the advice.:worship:

 

[mcvickj]

Here is a link to the Traxxas website that has the exploded views of the T-Maxx. Click on the link so you can see the front end view. Replacing a bulkhead on a T-Maxx is pretty easy. Good luck.

 

[nitro dave]

I agree with mcvickj- it isn't that hard, just watch what comes off when you are taking it apart, that way you know what goes where when you put it back together.

it is rather easy-good luck

 

[StrechM]

Bag the parts in small ziplock baggies and lable them if you are concerned about how to put it back together.

 

[FastEddy]

If you have a digital camera or a Polaroid it can make first time repairs a bit easier.

Once you have done it a few times you wont even think twice.

 

[msly]

Originally posted by FastEddy
If you have a digital camera or a Polaroid it can make first time repairs a bit easier.

Once you have done it a few times you wont even think twice.

You mean they can break more then once LOL

 

[FastEddy]

Originally posted by msly


You mean they can break more then once LOL

Now thats funny!

I have owned 3 T-Maxxes Believe it or not, I have never broken a bulk. I have striped the screw holes out on the stock ones but never broken one.

You will want to keep an eye out for a review on the new RC-Solutions bulks with hinge pins. They are a unique design. NCNitro will be doing a review on them in a few weeks.

-Ed

 

[NCNitro]

Yes, I am very much looking forward to doing this review. I will have pics, installation info, and test results. And trust me, they will be tested!

 

[ImBroken]

Do you need to run the CyberMaxx kit to use these new bulks? Or will they work with standard Maxx setups?

 

[FastEddy]

They will work on any Maxx that uses stock bulks.

 

[ImBroken]

I guess they're not available to the public yet? I didn't see them on the RC Solutions website.. Anybody have a pic of them?

 

[FastEddy]

I believe they are / will be available any day now.
Contact member scottm to order.