Butter Is Da Man
RCTalk Qualifier
Hey everyone. I got a Savage 25 up for sale. This was totally rebuilt, with new parts, and lubes. Its an awesome truck from what it was, I just cannot afford to spend anymore time or money in it. So here's a list of what it has.
-All Aluminum A-arms and Nova shock towers (15 mounting holes on each side of the tower. Maxx size Power Strokes can be put on with these towers)
-Picco 26 with good compression. Took out 2 of the 4 head shims that were in there for no apparent reason, and runs much better.
-MIP CVDs all the way around
-Kyosho 777 buggy diff gears (4 in each diff)
-ProLine 23mm hubs
-ProLine Velocity Dished Wheels (Yellow)
-ProLine 40 Series BowTies (95%) tread left
-Ofna 1/8 Buggy pipe, quieter than stock, and improves power
-HPI Roto Start system
-HPI 3-shoe clutch assembly
-HPI Cam-Type servo saver
-HPI High Torque Steering Servo SF-2 90oz of Torque
-GS Racing Air Filter
-Futaba Magnum Sport Radio, completely cleaned, and gone over, works fine with channel 84 crystals
-Brand new, on the truck:
-Exhaust header, came with wrong one
-Battery Box, one it came with was broken. Has charger jack mod done to the top of the box for easy charging for rechargable packs
-Clutch Nut, and Bell, originals were Ofna 1/8 buggy
-Spur and slipper assembly, original was all tore up, and completely screwed up, replaced everything
-Shocks were just redone by myself, had low fluid, and sludge when they came. Brand new fluid put in.
Everything on this truck was gone over for obvious reasons. Every nightmare on the truck has been taken care of. You will not be dissapointed with it now, like I was when I got it. All problems taken care of, and beefed up if possible. Has alot of new parts on it, that haven't seen any action at all.
I would like to get $400 so I could at least get back a little bit of what I have invested. I'm open to any reasonable offers, and pictures will be up tonight. Thanks for look
-All Aluminum A-arms and Nova shock towers (15 mounting holes on each side of the tower. Maxx size Power Strokes can be put on with these towers)
-Picco 26 with good compression. Took out 2 of the 4 head shims that were in there for no apparent reason, and runs much better.
-MIP CVDs all the way around
-Kyosho 777 buggy diff gears (4 in each diff)
-ProLine 23mm hubs
-ProLine Velocity Dished Wheels (Yellow)
-ProLine 40 Series BowTies (95%) tread left
-Ofna 1/8 Buggy pipe, quieter than stock, and improves power
-HPI Roto Start system
-HPI 3-shoe clutch assembly
-HPI Cam-Type servo saver
-HPI High Torque Steering Servo SF-2 90oz of Torque
-GS Racing Air Filter
-Futaba Magnum Sport Radio, completely cleaned, and gone over, works fine with channel 84 crystals
-Brand new, on the truck:
-Exhaust header, came with wrong one
-Battery Box, one it came with was broken. Has charger jack mod done to the top of the box for easy charging for rechargable packs
-Clutch Nut, and Bell, originals were Ofna 1/8 buggy
-Spur and slipper assembly, original was all tore up, and completely screwed up, replaced everything
-Shocks were just redone by myself, had low fluid, and sludge when they came. Brand new fluid put in.
Everything on this truck was gone over for obvious reasons. Every nightmare on the truck has been taken care of. You will not be dissapointed with it now, like I was when I got it. All problems taken care of, and beefed up if possible. Has alot of new parts on it, that haven't seen any action at all.
I would like to get $400 so I could at least get back a little bit of what I have invested. I'm open to any reasonable offers, and pictures will be up tonight. Thanks for look
