RCCA Pit Tip ??????

[Hypedonrc]

In the new RCCA Mag Pit Tip section, it say you can use Team Assoc. MGT Part # 25070 http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXFUC9&P=7 to mount the top of the shocks on a maxx so you can easily remove the shocks for whatever reason with out tearing the whole thing down. Question is I have Powerstrokes, so can I use those, or do I have to use these http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXHWH8&P=7 from Pro Line?

Added info from the Pro Line site:
http://www.pro-lineracing.com/proline.html

 

[robmob]

I installed Powerstokes on my MGT and was unable to use the stock MGT hardware to do it. I had to buy the Proline stuff to make it work. Based on that, you may need to Proline kit to make it work on the Maxx.

 

[jon2]

I agree with ROBMOB. THe spacers are not sufficient and cause the shocks to wobble. Go with the Proline kit.

 

[Hypedonrc]

That's what I was thinking. probably have to use the Pro Line kit, if you have Powerstroke shocks. It seems like a good mod though. That way you don't have to tear it down so much to take off the shocks.