Sold / Found Race ready Revo + LOTS of extras for sale.

[cheeseball01]

OK, here is my racer 5308. This thing is in great condition. It's only been on the street to break in two engines. Other than that it was track time only. Never bashed. Selling because we're going to race Truggy and Buggy class this year. I don't even want to add up what I've got invested in this truck. Looking for $550 OBO for the package shipped CONUS to your door. Or I can sell without the 18TZ, Radio, and box. I'll install the almost new 3.3 sell for $350 Shipped. I'm Also, willing to separate.

Specs.
Revo 5308.
Forward Only, Close Ration Transmission
GTR Shocks with Titanium Shafts (60wt Front, 70wt Rear)
Green Springs Front, Gold Springs Rear
All Traxxas T6 Red Aluminum Turnbuckles and Tow Links
P2 Rockers
Black Anodized aluminum bumpers
Single Servo Steering
Hitec 5955 Steering Servo (330 oz Titanium Gear)
JR Z590 MG throttle/brake servo
RD Racing Black Aluminum Axle carriers with 8x16x5 outer bearings
RD Racing 8mm stub axle shafts
M2C 17mm hubs and pins
Traxxas sway bar kit (front is not installed, but included)
Traxxas Wing mount
Traxxas Exocarbon Wing
RB Mods OS 18TZ with TM crank, TKO ceramic bearings (approx 12 tanks)
THS hard coated exhaust.
MIP Clutch
Traxxas 15 Tooth Clutch bell
Proline LPR Crime Fighters (about 90%)
Traxxas 150cc tank
RPM A-Arms Front
Traxxas extended arms rear
Orange Traxxas E-Revo Body
1400 Mah 5cell flat pack
JR X2I Radio and receiver (CH -78 crystal)
All Steve Slayden's Steering Mods. (minus the pivot balls and carriers)

Other parts included
RD Logics starter box (Gen II) with a couple xtra belts
Traxxas 3.3 Engine. Broken in and the put back in the box
Extra Clutch bell
Racer's Edge stand
2 Complete extra GTR Shocks
Xtra Springs
P1 Rocker Set
Extra FOC
Traxxas Hinge pins
Couple extra clutches (1 MIP 1 Traxxas)
Stock P2 Toe links and pushrods
extra shock mounts
tranny and front end skid
bumper mount
wide ratio tranny gears
shock pistons
Tanks strap and lid
couple traxxas arms
motor mount
Traxxas shock tower and body mounts
Traxxas roll bar
couple stock battery holders (1 traxxas 1 JR)
Traxxas 5 and 7mm wrenches.
one stock 2.5 body (drilled to fit the 3.3)
one Protoform harddrive body (it's about a 10 footer)

Here's a few pics, if you want more, give me your email, I have about 30 pics.

 

[cheeseball01]

OK, lets try this. $350 without the 18TZ, bump box, or radio. Will still be ARTR as I'll install the 3.3. I'm willing to seperate out. Also interested in doing partial trades. I'm looking for a basic Spektrum 2.4G radio and rxr (the dx2 or 3 or x3s) I'm also looking for JR 9100T and 9100S. And I need two transponders.

LMK what you have.

Thanks.
-Curt

LMK

-Curt

 

[Scrogg]

I just went thru this myself...it hurt my feelings bad. I had a lot of the same hop ups and then some too. Parting it out is your best option.

 

[cheeseball01]

I just went thru this myself...it hurt my feelings bad. I had a lot of the same hop ups and then some too. Parting it out is your best option.

Yeah, I can't believe the price people are paying for POS Revos with bling bling integy crap on it. But a badazz race setup sits there cuz it isn't shiney. Strange. I guess people that don't know what they're buying see shiney metal pieces and think it's good. I dunno. I will indeed part out though or trade for stuff.

 

[ohmygahitscoby]

Dangit, I wish I had some cash. Good luck with the sale!

Just wondering:

Selling because we're going to race Truggy and Buggy class this year.

Isn't the Revo a truggy?

 

[cheeseball01]

No, the Revo races in the Monster Truck class. Truggys are a buggy platform with wider suspension and bigger wheels and tires. The biggest difference between Monster Truck and Truggy is The Truggy has a flat chassis and nothing below it. The entire drivetrain sits above the chassis. They're a totally different beast.

 

[Scrogg]

A Revo setup for racing is tougher than most peeps realize, they make excellent bashers.
I used to do backflips with my Revo in the front yard when I was not racing. Never broke a thing.

 

[cheeseball01]

Yeah, she's tough as nails, for sure. The only thing is the rear skid, you have to check it every so often and replace it so the rear hinge pins don't fall out.

 

[cheeseball01]

Deal pending.

 

[rccks]

A Revo setup for racing is tougher than most peeps realize, they make excellent bashers.
I used to do backflips with my Revo in the front yard when I was not racing. Never broke a thing.

HA! you've never seen my revo! can't start it without breaking something. but all of the others i've raced are bulletproof(mine owns down the straightaway though).


good luck with the sale!

 

[Scrogg]

Yeah, she's tough as nails, for sure. The only thing is the rear skid, you have to check it every so often and replace it so the rear hinge pins don't fall out.

Integy makes a al. skid just like the stocker. it's bulletproof.

 

[cheeseball01]

Integy makes a al. skid just like the stocker. it's bulletproof.

Integy doesn't make anything that's worth anything. The only Integy piece I have that I like is a mini 4 way wrench.

 

[cheeseball01]

SOLD on Revo World.