Pull start one way bearing

[skeeter24]

I just bought a new pull start for my Savage 4.6 to convert it from roto start to pull. I got ready to put the pull starter on but the one way bearing is to big to fit in the pull starter. Anyone had this problem or heard of it happening? I looked on HPI site and it says both types of starting systems take same bearing but it wont fit. My pull starter was suppose to have came off of a Big Block Savage. Am I missing something....PLEASE HELP....I need to get this thing back together...

 

[BOUTCH]

there is this one for the .21BB:
http://www3.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=one+way+bearing+pull+start+hpi&search=Go

But then there is this one for the 4.6:
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJYU6&P=7

 

[skeeter24]

My bearing looks like the first one but wont fit in the pull starter...It has the shape of my bearing but mine is just little to large to fit....And the second pic dont look like it would even work in my pull starter..

I figured it out...I bought the 4 bolt pull starter....I need the 3 bolt pull starter...