Programming my Turnigy fatboy 300a

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

PASY

RC Newbie
Messages
2
Reaction score
0
Hello guys!
I'm working on an electric paramotor. I want to program my ESC, it's a fatboy turnigy 300a .
I'm looking for a software to program it. I bought the USB-LINKER but I don't know how to use it with my fatboy.
I went to the hobbyking page and downloaded everthing. I installed both Hifei and Turnigy super brain, wired everthing, but now I get this error "Can't find hardware 04HB's parameter setting". Also there's no recent firmware for my Turnigy Fatboy 300a any Idea where I can find it?
Is there an other way to program this esc? I can't find the programming box for it looks it's sold out...
I'm new to all this...
Any help/ suggestions?

Thanks for your time!
 
Hi,
Here's the answer from HK:

'If you haven't already, try installing the CP210X driver, or the Zadig software, available for download at the following links, that should resolve any USB COM port issues that could be causing the connection problem for the USB Linker.

https://www.silabs.com/developers/us...ge-vcp-drivers

https://zadig.akeo.ie/''

Actually, it didn't help much but I manage to connect my Fatboy with HIFEI version 5.02, it is recognize as a Fulcrum 300A (???)
I still don't know exactly what to do. I would really appreciate some help to program this ESC.
Here's my setup:
Rotomax 150cc
Turnigy Fatboy 300A
2X LIPO 7s 12000mah 25c

Any HIFEI specialist in the house ?
smile.gif

Thanks a lot for your time!
 
Last edited:
Looks like a propeller beanie! 🤣 Wish I could help you, some of the programming on these things is a pain in the backside.
 
Back
Top