Pro 15 reverse problems

[trx3.3awd]

I have a pro 15 tmaxx that i put a 2.5 in last spring. Now when i go to go in reverse the truck will stay in forward. I have lowered the idle needle and its as low as it can go before the motor will stol. Still the truch wont switch, when it does it tends to not switch back but its rare that i get it in reverse in the first place. I know alot abot the tmaxxs but nothing about but everything i do i can't get it to work.
Thanks

 

[Ballen]

get rid of reverse you need to do the FOC . foward only conversion. best thing you can do for the truckand your peice of mind.I did the same thing and mine is still going strong.
I put a 3.3 on mine and did the wide max conversion (makes it about "1- 1/2 " wider more stable for the faster turns) and changed all the shafts to the revo shafts.

 

[bgbdwlf2500]

They had enough trouble with the .15 in it. Some trucks would shift some wouldnt even from the factory. Changing the engine definately wouldnt help that situation. The best fairly inexpensive thing you can do is get rid of reverse. the transmission is so much stronger that way

 

[trx3.3awd]

Now what do i do to take the reverse out

 

[bgbdwlf2500]

buy the Robinson Racing Forward only kit and install it...done

 

[widowmaker]

just take off the servo and zip the pin in so if you want to put the reverse back on wont be that hard