Pricing question

[EddieB]

I'm not sure if a "Whats it worth?" thread is ok, if not then please delete this. I have a tmaxx 3.3, with an extra 3.3, transmission was just rebuilt, new spur gear and clutch bell as well. has a new opti drive, new LARGE air filter, needs partially put back together (shocks put back on and other very minor details) It needs a servo for reverse. it has the easy start and wand, an extra easy start, 3/4 gallon of fuel, and a robinson racing 44t spur (not installed) I also have a large selection of spare parts 3/4 of a truck (give or take). I have not started the 3.3 but it does seem to have good compression. Any clue what I should ask for this?

some pics, the shocks are not all on it at this point (need screws)

I dont believe this is from a 3.3 maxx

 

[MySim2City]

dont take less than 200 but I would shoot for 275-350.

 

[EddieB]

I listed it in the classifieds, check it out.

 

[knall]

That last picture looks more liek a 1.5 OLD SCHOOL, with talon tires.

Maybee just an odd camera angle...... but non adjustable shock positioning and narrow stance looks like an OLDY

 

[EddieB]

I'm pretty sure the shock position on the lower a arms is adjustable, i was thinking 2.5, but I've been wrong before, couple years ago..... I'll check it out.

 

[NCNitro]

knall is correct, that last pic is an old school narrow original maxx set up.

 

[2revo1maxx]

Yeah check out that tiny little driveshaft and narrow stance. I wish I could find one of those NIB.