miledtalon
RCTalk Rookie
- Messages
- 16
- Reaction score
- 0
- Points
- 0
- RC Driving Style
- Racing
i just had a quick question does anyone know what the almost perfect tuning for a tmaxx 3.3 is? it is also about 40 degres here
-
Welcome to RCTalk! 🚀
Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!
- ✓ Friendly & passionate RC enthusiasts
- ✓ RC tips & troubleshooting
- ✓ Buy, sell & trade RC gear
- ✓ Share builds & upgrades
perfect tuning
- Thread starter miledtalon
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Messages
- 35,104
- Reaction score
- 1,854
- Points
- 2,198
- Location
- In my recliner
- RC Driving Style
- Bashing
- Flying
There's no such thing as a specific setting for any 2 engines. It's all determined by temp, sound and performance.
miledtalon
RCTalk Rookie
- Messages
- 16
- Reaction score
- 0
- Points
- 0
- RC Driving Style
- Racing
- Thread starter
- #3
ok so if its bogging a bit when i go to take off say I've been running 10 minutes already what should i be turning?
- Messages
- 35,104
- Reaction score
- 1,854
- Points
- 2,198
- Location
- In my recliner
- RC Driving Style
- Bashing
- Flying
If it bogs from idle to take off you'll need to lean the LSN.
2revo1maxx
Hardcore RCTalk User
If it's 40 out be careful leaning anything. Make sure you have the high needle out past 4 turns. I have to run my 3.3 five turns out when it's 40 or less. Take Rolex's advice first, if it still bogs then it is lean-bogging. Richen the low needle. It's common for people to lean lean lean in the cold, you need to richen when it gets cold out.
Make sure it has plenty of smoke too.
Make sure it has plenty of smoke too.