Sold / Found Parts Motors

[kurt_02f150]

Ok the only thing i really know about these is the names. The first is a stock tmaxx 2.5 mill and the second is a pico .21 I don't know if either of them run since i have no way to test them but i DO know that there is nothing obviously wrong with them. The 2.5 has good compression and the .21 doesn't have a glow plug but the shaft moves nice and easily by hand. there are no broken parts anywhere from what i can tell but i can't promise anything. They came with my used max when i bought it and the .21 was installed but it was my first rc and i couldn't get it tuned so i bought an OS .18tm and went by the book on how to tune it. I am only asking 25+shipping for each. I really think they are fine but i won't sell them as working since i can't promise it.

FYI, the stock tmaxx header bolts directly onto the pico 21.

 

[bustedgears]

Do you have the engine mount to that .21.

If so, I might be interested.

 

[kurt_02f150]

I am 99% sure it uses the stock tmaxx engine mount. I do not have one though. sorry.

 

[Clintd]

The P2 uses a different mount that comes with the engine.

 

[kurt_02f150]

let me check around in my spare parts and see what i come up with. I thought for sure i pulled it off and put that 2.5 right back in its place though. maybe not though, its been several months.

 

[kurt_02f150]

Good News! I found the engine mount today. I was packing up and getting ready for houston and i came across an old rc box. Inside was nothing but old gears and who know what else. The mount for the motor was sitting right on top though. Here it is.

 

[phx123]

Pm sent...Let me know

 

[kurt_02f150]

Both Have Been Sold!!