DarthRacer
Hardcore RCTalk User
Ok fellas, I need a little help here.
My OS .15 is giving me some problems.
1) Difficult to start
2) Stalls after letting off the throttle after a quick high speed run (tried adusting the idle to prevent this, but this makes the Maxx tranny want to engage)
3) Difficult to re-start when hot
Notes:
1) I have checked for air leaks - haven't found any (used air pressure from mouth)
2) Using a new OS A3 plug
3) Engine is easy to start when a lean condition is produced when all fuel is taken out of the tank and the engine is started to burn the fuel in the lines
4) LSN is set so the engine stalls after pinching the fuel line for 4 seconds
5) I am using a TRX .15 HSN because my OS needle broke
6) Using fuel from last year stored in a low humidity / room temp area - 10% Nitro
My OS .15 is giving me some problems.
1) Difficult to start
2) Stalls after letting off the throttle after a quick high speed run (tried adusting the idle to prevent this, but this makes the Maxx tranny want to engage)
3) Difficult to re-start when hot
Notes:
1) I have checked for air leaks - haven't found any (used air pressure from mouth)
2) Using a new OS A3 plug
3) Engine is easy to start when a lean condition is produced when all fuel is taken out of the tank and the engine is started to burn the fuel in the lines
4) LSN is set so the engine stalls after pinching the fuel line for 4 seconds
5) I am using a TRX .15 HSN because my OS needle broke
6) Using fuel from last year stored in a low humidity / room temp area - 10% Nitro