one way bearing

[cbhowerton]

Can anyone tell me what the one way bearing looks like, I looked thru the manual and couldnt find it listed. trying to correct problem from previous "savage wont start thread". there are hardly any compressions when trying to start the savage

 

[robmob]

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDLN7&P=ML

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJYU6&P=7

 

[h8z2luze]

Are you using rotostart or pull start?

 

[BOUTCH]

Are you using rotostart or pull start?

I use the same one for the pullstart or the rotostart...just saying man.

 

[h8z2luze]

Oh ya that's right i'm retarded lol.

 

[cbhowerton]

is the oneway bearing in the crank case or the roto starter case?

 

[cbhowerton]

Ok,I found the oneway bearing but... I have taken the car apart from the roto to the bearing shaft. When I turn the roto shaft inserted in to the starter with my hands, I can see movement through the glow plug hole. Does this mean it is still stripped because the compressions arent catching. The shafts and bearings are well greased and not dirty.