On road car.. CEN Racing CT4 S Nitro 1/8th

[Freddybnj_2004]

I wanted to try my hand at on-road cars. I was curious about the 1/8th size...are there enough owners out there to get some racing competition or should I stick with 1/10th...
The car I was thinking about was the CEN Ct4 S...?
Any help?

 

[kwong2001]

There's a lot of 1/8 scale racers...but not as much as 1/10 since 1/8th are at least twice as expensive.

 

[StreetForce]

Yeah looking at alot more cost, depends what you're wanting to spend.

 

[Freddybnj_2004]

I apoligize

The website had the cars close together and it's actually a 1/10th.. my girlfriend ordered a CEN Racing CT4S for me and I am in the process of ordering a Novarossi TR15R engine for it.. any thoughts?

 

[kwong2001]

It's gonna be a screamer!!...btw, if you're new to onroad, run the stock engine for a little bit before you use the novarossi. Onroads can get away from you really fast if you're a noob to it.

 

[Freddybnj_2004]

Thanks I will.. does anyone know any other changes I would need to make if I swap engines .. or is it a staight swap?

 

[kwong2001]

It really depends on the header/pipe and also the crankshaft.

 

[Freddybnj_2004]

I guess I'll cross that bridge when I get to it.. or if this car is anything like they say.. hell I'll just jump the damm bridge... lol
Thanks for your input..

 

[nitrohead3000]

Freddy... That car should really be fast with a novarossi 15 in it.It already been clocked at 71-72 mph with the kit motor. I hope you don't have any major problems putting in the novarossi !! Good Luck!!