nitro_tacklebox
RCTalk Rookie
- Messages
- 21
- Reaction score
- 0
- Points
- 0
- RC Driving Style
I need to trade this for a Hyper 7 Pro or PBS....
Here's what I have....additional pictures available upon request:
This is a completely assembled Nitro TC3 that has never been run!
Its the kit, the Associated Nitro TC3 Non Pull Rear Exhaust kit(ASC2031). I also had purchased the Team Associated NTC3 Complete Carbon Kit(2371), which consists of the front and rear arm sets, hub carrier, front and rear shock towers, chassis brace, radio tray, and handle. This car is mint, I also have 2 bodies one a Proline Crowd Pleaser and the other a Protoform Opel Vectra...The car has the kit tires on it currently and they were never glued. I also have a few Traxxas Inch-Up rims that will go along with it. The original Box, Instructions, and extras that came with it will be included as well. I will also throw in the extra plastic parts that were replaced by the Carbon kit.
The starter box is an Ofna box (PART NUMBER: 10255- w/Power Panel) and has a Gel Cell battery installed. This is a used starter box but very good condition (pictures available upon request)
The engine is a Mugen MT-12 that i rebuilt with a new conrod- sleeve and piston that I never even started back up since building the car. It has after run oil in the engine to protect it from pitting or rusting.
I also have a Hudy Set-Up board that is included.
The servo's and battery as seen in the pictures will NOT be included (unless the price is right).
you can email me at [email protected] for any additional info
Pictures can be found on:
http://www.radiocontrolzone.com/for...threadid=144631
Here's what I have....additional pictures available upon request:
This is a completely assembled Nitro TC3 that has never been run!
Its the kit, the Associated Nitro TC3 Non Pull Rear Exhaust kit(ASC2031). I also had purchased the Team Associated NTC3 Complete Carbon Kit(2371), which consists of the front and rear arm sets, hub carrier, front and rear shock towers, chassis brace, radio tray, and handle. This car is mint, I also have 2 bodies one a Proline Crowd Pleaser and the other a Protoform Opel Vectra...The car has the kit tires on it currently and they were never glued. I also have a few Traxxas Inch-Up rims that will go along with it. The original Box, Instructions, and extras that came with it will be included as well. I will also throw in the extra plastic parts that were replaced by the Carbon kit.
The starter box is an Ofna box (PART NUMBER: 10255- w/Power Panel) and has a Gel Cell battery installed. This is a used starter box but very good condition (pictures available upon request)
The engine is a Mugen MT-12 that i rebuilt with a new conrod- sleeve and piston that I never even started back up since building the car. It has after run oil in the engine to protect it from pitting or rusting.
I also have a Hudy Set-Up board that is included.
The servo's and battery as seen in the pictures will NOT be included (unless the price is right).
you can email me at [email protected] for any additional info
Pictures can be found on:
http://www.radiocontrolzone.com/for...threadid=144631
