New Stuff

[SunnyD]

Just picked up a set of RPM HD A-Arms - Integy Shocks with "real Piggybacks" - Red Firm Springs @ 5.95 lbs. - rear bumper cause i trashed mine from a 7 ft or more jump that i landed a bit on the ass lol. The RPM A-arms look alot stronger then stock, great buy
Ill try and post some pics once shes back together again :thumbup:

 

[RatzoRC]

Did you get the blue arms?

 

[SunnyD]

yep only had the blue arms in stock

 

[SunnyD]

Nice Sig RatzoRC

 

[nitromadman]

Is the suspension stiffer now?

 

[RatzoRC]

Thanks Sunny. Just a few of my cars, and a little fade in the sig.
Nice pic of the MGT!
I like the blue arms.
Piggies are nice too.

 

[SunnyD]

thx mang, the piggys rock, great improvement over stock :thumbup: and yes it is stiffer now nitromadman but not by much, I'm using 40 wt. oil as recommended by integy with the red springs but i would reccomend the copper ones for a even a stiffer ride but was told it may be a bit bouncy which imo shouldnt be a factor because u can always add or remove the spacers u want for the amount of recoil needed. copper springs are a must for big air...

 

[SunnyD]

Hooah !
My MGT optional steering kit has arrived along with my side exaust manifold, robo disc brake rotor and heavy copper springs rated @ 6.90 lbs, which should help me keep from bottoming out on some big air jumps... ill try and post some pics once shes back together again, kinda dirty from my last bashing session..Now i finally get to put my HiTec HS-5945MG Prog. Dig.Ultra High Torque servo in!(180oz.@6v) since the servo saver is adjustable now i can get more power to the steering and lose some of the slop thats in the stock setup. ! can't wait ! B4 pic