New pipe for maxx

[Ckeithnitro]

great thanks for the info.. i'll check into it

 

[Kyleb]

The thunder chassis dogbone is 101.5mm
The stock 3.3 chassis uses the 77mm dogbone
The monoblock with thunder is already on the truck. It roughly measures close to 123mm. Maybe give robin a call

 

[Ckeithnitro]

The thunder chassis dogbone is 101.5mm
The stock 3.3 chassis uses the 77mm dogbone
The monoblock with thunder is already on the truck. It roughly measures close to 123mm. Maybe give robin a call

Kyleb i just PM you for some info..

 

[Ckeithnitro]

Yup it will bolt up without an issue, I would ask Robin @UE when placing the monoblock order what dog you need.

The Thunder chassis uses a 100mm bone, & a thunder chassis with monoblock uses a 123mm bone if memory serves right.
Maybe Kyleb will measure his monoblock dog bone pin center to pin center for us?

A short chassis maxx w/black trany uses a 70mm bone so the UE 93mm bone should be what you need for a 4910 short chassis w/monoblock.

right i have the short 4910 chassis add not including output yokes it is 70mm
so actual extension of the mono block is 23-25mm ? overall lenght is 32mm?
or is actual extension more like 10-12mm