needle settings

[srad750c]

Anyone out there know good baseline carb settings for the revo 3.3 after you install the 5483 resonator. I have had to richen it up alot at both needles. Still a few glitches though. 1 glitch is really weird, from a stand still and you gun it sometimes it stalls fo 2 secs, then halls a.., most of the time it doesn't do this is ti the low or high needle or both. high needle is at 4.5 turns, low needle flush.....got any suggestions

 

[brmax]

i run mine at just inside flush on the lsn. on the hsn i run mine at about 4-3.5. Haha u have a long enough antenna there

 

[alx]

The thing your talking about, sputtering for 2 seconds then taking off would be the LSN turned too rich, at least thats what it sounds like.

Your probably rich on the HSN also because I know 4 turns out is the stock setting.

 

[srad750c]

yeah i know, i hate the spaghetti thing look...hahahahaha