• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

Need help with servo/receiver problem

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
A

afm1990

RC Newbie
Messages
2
Reaction score
0
Points
0
Location
Evans
RC Driving Style
Because of life's responsibilities, I haven't used my revo in 12 months. I went to start it up and the steering and reverse servos do not respond. The accelerator servo does. Do I need a new receiver? Servos? I've checked the wiring for loose connections. Any idea what the problem could be? Any help would be appreciated. TIA.

Alfredo
 
I bet your battery pack is not charged or will not hold a charge. I would check that before you buy a new reciever or servos.
 
Already did that!

I just bought a new battery because the old one would not hold a charge. Thanks for the idea.

Alfredo
 
Try plugging the throttle servo into the steering servo slot on the reciever and then turn the wheel on your tx. I the servo moves then there's a problem with the rx. If not then it's most likely the servo. Assuming these are stock servo's? They leave a little to the imagination.
 

RC Builds

Back
Top