my new ride(not 56K friendly)

[shorty]

HPI SAVAGE RTR- 400$
HPI SILVER Ribbed tuned pipe- 35$
Heavy Duty Dogbones all around- 38$
HITEC- 645mg Servo – 45$
Ofna Servo saver- 14$
HPI Heavy Duty 1200Mah RX Hump pack- 30$
Reverse Module- 34$
Servo for reverse module-20$
Engine porting by Uriah Murnan – 85$
(http://murnanmodified.360k.com/)
Blue exhaust connector-4$
Golden horizons blue and chrome cool head – 39.99$
Heavy Duty 14t Clutchbell-14$
center skid plate- 24$
‘S4S’ Shock covers 14$
Motor saver 3 Stage air filter – 19$
Titanium turbo vent Disk brake - 26$
4 spider mod 22$
864$

all my cars

Savage ss25 truck £375.00
Ko propo ex11 transmitter £175.00
Ko propo fet pds2343 servo £99.00
Ko propo fet pds2344 servo £99.00
Sanwa standard servo for reverse £10.00
Reverse module £29.99
Glow starter with meter and charger £22.99
Hpi savage carry case £45.00
1100mha 6v recargable battery £18.99
integy ally chassis main braces £10.99
integy ally chassis side braces £19.99
integy ally fuel tank guard £13.99
gpm ally skid plate £19.99
Teflon bearings all round (including steering) £30.00
Hpi 3 shoe clutch £17.99
hpi pt862276 heavy duty cup joint £11.99
hpi pt86152 heavy duty dog bone £9.99
hpi pt86151 heavy duty dogbone £9.99
hpi pt86277 heavy duty cup joint £11.99
hotbodie ally brake disc with pads £18.99

that’s a total of £1097.78 or $2010 usd

and a standed nMT that i got of eBay for £200 or $390 usd

+ some other bits and piceces like fail safes and stuff

 

[pissant]

your cars rock and i really like the blue savage look!

 

[robmob]

Looks sweet. Nice job.

 

[newnitrofan]

Hmmm that new savage you have is sweet. It amazes me to see that someone went put all this time and money into it which takes a lot of care but it is still however riding on stock rims that will strip out. Sad actually. Newayz nice rides homie.

 

[AC48]

That is a very nice ride...but one thing, get some new rims. Mine haven't stripped ...yet...but i got some prolines anyway. They look very nice and i wont have to worry about stripped wheels. But over all, a very nice savage indeed.

 

[Jamie]

thats looks SWEET! Looks really good!

 

[Maxx Trooper]

sweet rides man. looks like the R/C bug has gotten u. its addictive... ur gona spend lots of cash now. lol. it happens to the best of us.

later

 

[shorty]

Originally posted by newnitrofan
Hmmm that new savage you have is sweet. It amazes me to see that someone went put all this time and money into it which takes a lot of care but it is still however riding on stock rims that will strip out. Sad actually. Newayz nice rides homie.

Well as the tile suggests it’s a new car and Iv only just finished striping it and rebuilding it. cuz I got if of some t**t in the US and it was fuci*ed so I'm still putting my stamp on it. but I'm not one to go out and waste £70 on new rims till these wear out and as it happened I have lots of sets of wheels but ur wrong about the stock rims yes they do strip out. But mine lasted well over a year. so i then went and got some truckzilla wheels and they lasted 1 hour before the entire middle feel out but I was not about to throw a new set of rims out so I made metal middle and there sweet now

stock rims striped

New metal middles

 

[El Pirata]

Looks like a nice fleet. Is that the savage you got off e-bay?

 

[shorty]

ye when i started striping it there was so much wrong not big things. but things like screws missing and brakes fiddlesticked and he also didnt send alot of the stuff. like the temp gun but i e-mail him lots and he replayed once saying it wasn't in the auction but i was here`s a copy of the e-mail i sent him
.
ok I got the truck to day just a couple of things tho
1:there are lots of screws missing and lot of screws in the wrong places
2:there was no temp gun
3:I got charged $200 by uk customs (not ur fault I know )

all I can say is if this truck had gone to a newbie in R/C then they would
not no where to start with fixing it.I know what I'm doing and it will still
take me a week or so to get all the bit and fix this truck so all I ask is
for a little money back because of poor condition and missing temp gun


i also left him another bad feed back

 

[newnitrofan]

Shorty don't get me wrong I actually wasn't talking about you Iknow you just got the truck. I was talking bout the guy before you. Seems like he abused it and did not take care of it. I was in the same situation when I bought mine there was loads wrong with it. Bad one way bearing, bent shock shaft, no shock oil in it at all, Rims stripped out. Probably some other crap but all in all it's fine now.

 

[shorty]

good to hear it newnitrofan

 

[Jamie]

Have you got the item number to this auction i would like to see what he said you get and the condition and stuff. or just give me his username i can can go to his feedback and get it from there

 

[shorty]

To get the whole story read this
https://www.rcnitrotalk.com/forum/showthread.php?s=&threadid=17245